Name: Kingston KVR16S11/8WP DDR3 8GB 1600MHz Notebook RAM
SKU: KVR16S11/8WP
Price: 158.00 MYR
Availability: InStock

Kingston KVR16S11/8WP DDR3 8GB 1600MHz Notebook RAM

RM158.00

• JEDEC standard 1.5V Power Supply
• VDDQ = 1.5V
• 800MHz fCK for 1600Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 11, 10, 9, 8, 7, 6, 5
• Programmable Additive Latency: 0, CL – 2, or CL – 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB : Height 1.180” (30.00mm), double sided component

5 in stock

SKU: KVR16S11/8WP Category: RAM

– Kindly PM/ Inbox us before place order . We need check stock. Thank you.

♦Dear Value Customer, Please do a Video Record :

1. The Packaging Condition Of The Parcel On Arrival 2. The Process Of Unboxing The Parcel & Item ►FOR THE DAMAGES/FAULTY CLAIM PURPOSES ◄

♦–Any claim without video proof will not be entertained.–♦

♦———————- Thank You For Your Purchase ———————-♦

♦Kepada Pelanggan Yang Dihormati , Sila Merakam Video:

1.Keadaan Bungkusan Bila Terima Barang 2.Semasa Membuka Bungkusan Bila Terima Barang ►BAGI TUJUAN KETIDAKSEMPURNAAN / TUNTUTAN KEROSAKAN◄

♦–SEBARANG TUNTUTAN TANPA BUKTI RAKAMAN VIDEO TIDAK AKAN DILAYAN–♦

♦—————————————-Terima kasih atas pembelian anda—————————————–♦

♦尊敬的客户，请您录制以下视频作为包裹/产品损害/过失索赔的证据：

1.包裹到货时的包装情况 2. 包裹和产品的开箱过程 ►用于损坏/故障索赔目的◄

♦–任何没有视频证明的索赔将不予受理–♦

♦—————————————-感谢您的购买—————————————–♦

KVR16S11/8 8GB 2Rx8 1G x 64-Bit PC3-12800 CL11 204-Pin SODIMM

DESCRIPTION This document describes ValueRAM’s 1G x 64-bit (8GB) DDR3- 1600 CL11 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.5V. This 204-pin SODIMM uses gold contact fingers.

CL(IDD) 11 cycles Row Cycle Time (tRCmin) 48.125ns (min.) Refresh to Active/Refresh 260ns (min.) Command Time (tRFCmin) Row Active Time (tRASmin) 35ns (min.) UL Rating 94 V – 0 Operating Temperature 0C to 85C Storage Temperature -55C to +100C

• JEDEC standard 1.5V Power Supply • VDDQ = 1.5V • 800MHz fCK for 1600Mb/sec/pin • 8 independent internal bank • Programmable CAS Latency: 11, 10, 9, 8, 7, 6, 5 • Programmable Additive Latency: 0, CL – 2, or CL – 1 clock • 8-bit pre-fetch • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] • Bi-directional Differential Data Strobe • Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%) • On Die Termination using ODT pin • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C • Asynchronous Reset • PCB : Height 1.180” (30.00mm), double sided component